Beijing far east deli electronic co., LTD. - provide electronic chip processing, plug-in after welding, assembly testing processing services
Beijing Far East Deli Electron
NEWS
INFORMATION
Contact

ESOS Helpline：
010-69732158

Electronics：18610379671

Molding：18232481486

PCB assembly circuit board design skills

        Good PCB design can reduce the assembly cost to the greatest extent, so PCB design should also be done according to the actual PCB assembly style. Below, we summarize a series of tips, which will be helpful in creating PCB design, so as to minimize the cost related to PCBA.


Good PCB design can reduce the assembly cost to the greatest extent, so PCB design should also be done according to the actual PCB assembly style. Below, we summarize a series of tips, which will be helpful in creating PCB design, so as to minimize the cost related to PCBA. Intelligent circuit board design, minimize PCB assembly costs
 
Please follow this short list of best practices to ensure that your PCB components do not incur unnecessary costs due to the layout of the circuit board design.
 
Component position in circuit board design
 
If this is not considered in the layout phase, it may be an important cost driver for PCB design. First, you need components in a specific location, such as buttons, screens, or ports.
 
Place the components on one side of the circuit board as far as possible. When components must be placed on both sides, try to place sensitive, heavy-duty and / or through-hole components on the "primary side". Components requiring special attention should also be placed on the "primary side".
 
Minimize trace length
 
Try to place the circuit board assembly in a way that minimizes the routing length without endangering the function.
 
Component orientation
 
If possible, make sure your components are designed with 0 in PCB design ° Or 90 ° Corner placement. As far as possible, orient the components in the same direction and ensure that all polarizing components are in the same direction. Avoid placing components at odd angles unless necessary.
 
Spacer elements in circuit board design
 
It is better to evenly separate the components in the horizontal and vertical directions, leaving at least 100 mils between each component and at least 100 mils away from the edge of the circuit board, so as to minimize the assembly cost.
 
Circuit board complete
 
Please consult your PCB assembly provider to ensure that the surface treatment you choose is most suitable for the assembly process.
 
Circuit board design software
 
Using circuit board design software, which has various component libraries, such as bchartus ®， To avoid creating component packages from scratch.
 
Advanced PCB assembly design and circuit board design should complement each other, which can effectively save the cost of manual assembly.
 
About PCB assembly cost and production and processing price, please consult the customer service of the company for quotation



Tel：18610379671

Headquarters ：Gaoxin 3rd Street, Changping District, Beijing

The factory ：Hebei Yanjiao Economic Development Zone

Business ：The device 、SMT processing、 Injection molding

微信客服

Consulting
Manager li
Hotline
010-58412592
Message
The problem of online
Return